PENERAPAN METODE VALUE STREAM MAPPING DALAM PROSES PENGADAAN UNTUK MENGURANGI LEAD TIME PROCESS PADA PT ABC
Published 2025-10-15
Keywords
- Value Stream Mapping,
- Lead Time,
- Procurement,
- waste,
- Proses Efficiency
How to Cite
Abstract
Abstract
This study aims to analyze the application of the Value Stream Mapping (VSM) method in the procurement process at PT ABC to identify waste and reduce lead time. The main problem faced by the company is the lengthy procurement process due to numerous non-value-added (NVA) activities, such as repetitive document verification, negotiations with fixed vendors, and multi-layered approval procedures. This research adopts a qualitative descriptive approach using a case study method. Data were collected through interviews, observations, and document analysis.
The findings reveal that out of a total process time of 6,750 minutes, only 1,680 minutes (24.9%) were categorized as value-added (VA) activities, while the remaining 5,070 minutes (75.1%) consisted of non-value-added and necessary non-value-added activities. After conducting analysis using VSM and developing a Future State Mapping, the total process time was reduced to 3,030 minutes. The proportion of value-added activities increased to 55.4%, while non-value-added activities were significantly minimized. Therefore, the implementation of VSM proved effective in reducing lead time by 55.1% and enhancing the efficiency of the procurement process. This study recommends optimizing the use of ERP systems, establishing process time standards, and eliminating non-essential activities. Future researchers are encouraged to expand the scope of the study and include cost-efficiency analysis for more comprehensive results.
Keywords: Value Stream Mapping, Lead Time, Procurement, Waste, Process Efficiency.
Downloads
References
- Apriliana, F, S., & Astuti, R. D. (2018). Penerapan Value Stream Mappiang (VSM) Untuk Mengurangi Keterlambatan Proses Pengadaan Barang dan Jasa di PT X (Studi Kasus Pengadaan Barang dan Jasa A4100000121). Performa: Media Ilmiah Teknik Industri, 17(1), 61-70.
- Arunizal, S., Wardhani, D. H., & Windarta, J. (2024). Penerapan Value Stream Mapping (VSM) untuk Menurunkan Lead Time Process dan Meningkatkan Kinerja Aktivitas Pengadaan di Site Tambang. Jurnal Profesi Insinyur Indonesia (JPII), 2(3), 141–150.
- Benedikta, A. O., & Sukarno, I. (2020). Evaluasi Proses Pengadaan Barang Menggunakan Metode Value Stream Mapping pada Perusahaan Minyak dan Gas. Jurnal Logistik Indonesia, 4(1), 20-31.
- Cresswel, John W. (2019). Penelitian Kualitatif & Desain Riset Memilih di Antara Lima Pendekatan. Yogyakarta: Pustaka Belajar.
- Damayanti, H. A. (2023). Analisis Penerapan Lean Dengan Metode Value Stream Mapping Untuk Mengurangi Pemborosan pada Proses Pengadaan Barang dan Jasa. Skripsi, Universitas Logistik dan Bisnis Internasional.
- Fauzi, Ahmad, dkk. (2022). Metodologi Penelitian. Banyumas: CV Pena Persada.
- Fhadillah, I., Anggraeni, N. F., & Awaliah, A. R. (2020). Analisis Pemborosan di PT. XYZ Menggunakan 8 Waste. Jurnal Ilmiah Teknologi Informasi Terapan, 6(2), 157-162.
- Gasperz, V. (2007). Lean Six Sigma for Manufacturing and Service Industries. Jakarta: PT Gramedika Pustaka Utama.
- Gasperz, V., & Fontana, A. (2011). Lean Six Sigma for Manufacturing and Service Industries: Waste Elimintation and Continuos Cost Reduction. Bogor: Vinchristo Publication.
- Halim, Kristina, & Pailit, Herry Christian. (2016). Perbaikan Proses Penerimaan Spare Part dengan Menghilangkan Peran Gudang Main Store: A Case Study. Jurnal Titra, 4(2), 257-264.
- Jing, S., Hou, K., Yan, J., Ho, Z. P., & Han, L., (2021). Investigating the Effect of Value Stream Mapping on Procurement Effectiveness: A Case Study. Journal of Intelligent Manufacturing, 32(4), 935-946.
- Kusuma, R. D. P., & Hasibuan, S. (2022). Implementation of the Lean Service to Increase Productivity n The Procurement of Goods and Services of MRO Companies. In International Conference on Industrial Engineering and Operations Management (pp. 1012-1022). Nsukka, Nigeria: IEOM Society International.
- Nugroho, M. Z, P., Hasibuan, S., & Adiyatna, H. (2021). Application of Lean Manufacturing to Improve Procurement Lead Time in the Case of the Steel Industry. Institure of Phsyics (IOP) Conference Series: Materials Science and Engineering, 1010(2021), 12-22.
- Pande P. S., Neuman, R. P., & Cavanach, R. R. (2002) The Sigma Way (Bagaimana GE, Motorola, dan Perusahaan Terkenal Lainnya Mengasah Kinerja Mereka). Yogyakarta: Andi.
- Putra, M. D. (2018). Analisa Penyebab Rework Kabinet Upright Warna Polished Mahoghany dan Polished Walnut pada Factory 2 Menggunakan Pendekatan FMEA dan AHP. Skripsi, Universitas Islam Indonesia.
- Saad, S. M., Kunhu, N., & Mohamed, A. M. (2016). A Fuzzy-AHP Multi-Criteria Decision Making Model for Procurement Process. International Journal of Logistics System and Management, 23(1), 1-24.
- Setiawan, I., & Rahman, A. (2021). Penerapan Lean Manufacturing untuk Meminimalkan Waste dengan Menggunakan Metode VSM dan WAM pada PT XYZ. Seminar Nasional Penelitian LPPM UMJ,Universitas Muhammadiyah Jakarta, 28 Oktober 2021.
- Sugiyono. (2022). Metode Penelitian Kuantitatif, Kualitatif dan R&D. Bandung: Alfabeta.
- Widiantoro, B. C. (2015). Upaya Minimasi Waste pada Proses Pengadaan Barang/Jasa di PT Pertamina Hulu Energi (PHE) Menggunakan Lean Service. Jurnal Operation Excellence,7(1), 82-91.
- Zahrotun, N., & Taufik, I. (2018). Lean Manufacturing: Waste Reduction Using Value Stream Mapping. E3S Web of Conferences, 73: 07010.